عنوان پایان‌نامه

بررسی استفاده از تزریق پلیمر بر بازده حجمی فرایند جابجایی در مخازن ترکدار



    دانشجو در تاریخ ۱۵ بهمن ۱۳۹۱ ، به راهنمایی ، پایان نامه با عنوان "بررسی استفاده از تزریق پلیمر بر بازده حجمی فرایند جابجایی در مخازن ترکدار" را دفاع نموده است.


    محل دفاع
    کتابخانه پردیس یک فنی شماره ثبت: 1287.;کتابخانه مرکزی -تالار اطلاع رسانی شماره ثبت: 58547;کتابخانه مرکزی پردیس 2 فنی شماره ثبت: 134
    تاریخ دفاع
    ۱۵ بهمن ۱۳۹۱

    در این پروژه اثر تزریق پلیمر بر بازده حجمی جابجایی در یک مخزن شکافدار با استفاده از ابزار شبیه‌سازی نرم‌افزاری بررسی شده‌است. به این منظور ابتدا با مقایسه‌ی روش‌های معمول در شبیه‌سازی مخازن شکافدار، روش مناسب برای مدل‌سازی فرآیند تزریق پلیمر در این مخازن انتخاب شده‌ و پس از آن جزئیات فرآیند در مدل انتخاب شده بررسی شده‌است. اثر تزریق پلیمر بر مکانیزم‌های تخلیه‌ی ماتریس در این پروژه مورد بررسی قرار گرفته و نشان داده شده است که تزریق پلیمر به جای تزریق آب باعث تضعیف مکانیزم آشام خودبه‌خودی و تقویت مکانیزم رانش ویسکوز می‌شود. از طرفی میزان بازیافت نفت در دو فرآیند مقایسه شده و مشاهده شده است که تزریق پلیمر به جای تزریق آب، میزان بازیافت از یک مخزن شکافدار را افزایش می‌دهد. برای بررسی اثر تزریق پلیمر بر بازده حجمی جابجایی، شاخص جدیدی تعریف شده و افزایش بازده حجمی بر مبنای این شاخص نشان داده شده است. در بخش آخر عوامل مختلف تأثیرگذار بر عملکرد تزریق پلیمر در مخزن حساسیت‌سنجی شده و ارتباط هریک از این عوامل با تحرک پذیری، مکانیزم آشام و بازده حجمی مورد بررسی قرار گرفته است. این پروژه به شکلی انجام شده است که می‌تواند به عنوان یک تحقیق پایه در مدل‌سازی تزریق پلیمر در مخازن شکافدار مورد استفاده قرار بگیرد.
    Abstract
    In the present project, volumetric displacement efficiency of polymer flooding in a naturally fractured reservoir using simulation software tools has been investigated. At first, using the comparison of conventional methods in NFRs simulation, sufficient method for polymer flooding simulation has been selected. Then, process detail on the selected model has been investigated. In this project, the effect of polymer flooding on matrix drainage mechanisms have been has been studied too, and has been displayed that injection of polymer solution instead of water causes in the weakness of spontaneous imbibitions and encouragement of viscous flooding. On the other hand, oil recovery has been compared in two processes and has been observed that in a NFR polymer flooding instead of water flooding increasing the oil recovery. A new index has been introduced in order to investigation of the effect of polymer flooding on the volumetric displacement efficiency, and increase in volumetric efficiency has been demonstrated based on this index. In the last session, sensitivity analysis on the various parameters that influences on the polymer flooding efficiency has been executed and relation of this parameter with mobility, imbibitions mechanism and volumetric efficiency has been investigated. Present project has been done as well as a basic research for polymer flooding in naturally fractured reservoirs.